Table of Contents
Sunway, EG4, Sol-Ark, Growatt, LuxpowerTek, Fortress Power, GoodWe, Deye, SolaX and Schneider Electric are ten suppliers to check for a 120/240V split-phase hybrid ESS project. For a five-maker home-backup shortlist within that group, start with Sunway, EG4, Fortress Power, GoodWe and SolaX, subject to the exact battery and transfer design. Sunway stands out when an installer wants a quoted equipment set that already lists solar modules, a split-phase hybrid inverter, a 51.2V battery, mounting parts and PV cabling. Several other names supply an inverter platform and compatible storage rather than the same packaged bill of materials; that distinction matters more than a “hybrid” label.[1]
The table below compares the published system boundary, not a claim that every configuration has the same backup rating or local approval. A split-phase output must feed both 120V legs and the intended 240V loads, while the battery, transfer equipment and grid settings must match the exact installation.
Ten suppliers and what they actually offer
| Supplier | Published 120/240V route | What to verify in a quote |
| Sunway | 5–10 kW US split-phase solar-plus-battery equipment list | Exact inverter, 51.2V battery and certification combination.[1] |
| EG4 | 18kPV split-phase hybrid inverter with EG4 48V batteries | Battery count and continuous backup load.[2] |
| Sol-Ark | 15K-2P hybrid inverter with external battery bank | Approved battery list and generator/backup wiring.[3] |
| Growatt | SPH 8000–10000TL-HU-US plus approved battery | Listed battery pairing and installer settings.[4] |
| LuxpowerTek | 5–13 kW 120/240V hybrid solution with battery storage | Inverter/battery combination and grid jurisdiction.[5] |
| Fortress Power | Envy True 12kW plus eForce/eVault/eFlex batteries | Battery minimum and protected-load arrangement.[6] |
| GoodWe | ES-US split-phase hybrid plus HV battery | Battery voltage and compatible storage SKU.[7] |
| Deye | US split-phase hybrid inverter family | Battery compatibility and local approval of quoted model.[8] |
| SolaX | A1 Hybrid G2 plus T-BAT-SYS-HV-5.0 | Exact inverter-battery certification pairing.[9] |
| Schneider Electric | XW Pro 120/240V inverter/charger with solar and battery components | Solar charge/control architecture, not an all-in-one PV inverter.[10] |
This is a shortlist of supplier routes, not ten interchangeable boxed kits. “Split-phase” does not establish an ESS system listing, permit eligibility or an automatic transfer design. Ask the installer to identify every part number in the final single-line diagram.
The five-name backup subset needs a tighter test than the ten-name split-phase list. Sunway’s kit includes a battery and hybrid inverter for nighttime and backup use, but the protected-load panel and transfer method still need specifying.[1] EG4 and Fortress Power publish inverter-and-battery routes; GoodWe’s ES-US uses a separate Automatic Backup Device for protected loads, while SolaX requires its matching battery and backup accessories.[2][6][12][9] These are suitable candidates for a home-backup design review, not a claim that five quoted configurations have identical outage performance.
Sunway: a bill of materials, with one important ambiguity
The Sunway 5–10kW energy storage system includes a US split-phase hybrid inverter in 5, 6, 8 or 10 kW versions. Its equipment list specifies 51.2V low-voltage batteries in 100, 200 or 300Ah options, alongside half-cell PV modules, roof/ground mounting, cable and connectors. That makes it useful for installers wanting a coordinated procurement conversation rather than a bare inverter enquiry.[1]
Sunway’s overview mentions high-voltage batteries, but the US split-phase equipment set specifies low-voltage 51.2V packs. Resolve that conflict with a signed, model-specific inverter and battery schedule. A high-voltage pack must never be paired with a low-voltage inverter because the marketing description sounds similar. Sunway’s energy storage product range also includes systems that are not this split-phase battery kit; the exact category and model matter.[11]
Sunway may suit a distributor seeking one supplier for the main PV and storage hardware. Not every possible inverter-battery combination can be presumed to carry the ESS system certification required by a particular US authority having jurisdiction. Obtain the listing or test evidence for the quoted combination, plus warranty terms, support route and replacement-part plan.
Where the other suppliers differ
EG4, Sol-Ark and Fortress Power: North American backup focus
EG4’s 18kPV offers 120/240V split-phase output and closed-loop communication with EG4 48V batteries. Its inverter specification gives 12 kW continuous AC output, not the 18 kW PV-input figure in the product name. That difference is a useful reminder to size backup from AC output and load surge, not from a model label.[2]
Sol-Ark’s 15K-2P is a hybrid inverter platform for solar, grid, generator and a battery bank. It defaults to 120/240V split phase. The purchaser must still choose a compatible battery and confirm the wiring and transfer arrangement.[3] Fortress Power puts its Envy True 12kW inverter and 48V eForce, eVault MAX or eFlex MAX batteries under one brand. That 120/240V ecosystem is simpler to specify, though battery quantity still depends on discharge current and runtime.[6]
Growatt, LuxpowerTek and GoodWe: compatibility-led designs
Growatt’s SPH 8000–10000TL-HU-US is explicitly classified as split-phase hybrid, with an approved-battery list linked from the product page. Match the exact inverter revision and battery SKU to that list; a generic “48V battery” answer is not enough.[4] LuxpowerTek markets a 5–13 kW 120/240V hybrid solution with storage. Its broad range makes it relevant to several home sizes, but installers should request the proposed inverter-battery pairing and grid documentation rather than assume all combinations have identical approvals.[5]
GoodWe’s ES-US range is a 5–11.4 kW split-phase hybrid inverter using high-voltage batteries from 80 to 495V. That is a different DC architecture from Sunway’s 51.2V equipment table. Battery voltage cannot be swapped across these systems, and the installed battery model should appear in the project submittal.[7]
Deye, SolaX and Schneider Electric: check the system boundary
Deye lists several US split-phase hybrid inverter families. The model selection spans different power and battery-voltage arrangements, so specify the complete model code before asking about battery compatibility or certification.[8] SolaX A1 Hybrid G2 pairs with its T-BAT-SYS-HV-5.0 modules; the supplier provides an integrated storage path rather than only an inverter. Confirm which exact pairing and backup accessories are in the quoted package.[9]
Schneider Electric’s XW Pro is a 120/240V battery inverter/charger that can be configured with renewable sources and generators. It is not a PV-plus-battery all-in-one inverter in the same way as the Sunway equipment list or EG4 18kPV. It can suit installers who prefer a modular electrical design, but solar charge control and additional balance-of-system parts belong in the scope.[10]
Buying checks before choosing any supplier
Start with an actual load schedule. Separate 120V lighting and outlets from 240V well pumps, HVAC, workshop tools or other motors. Note each running wattage, starting surge and whether it must survive an outage. A nominal 10–15 kW inverter may still fail a badly grouped motor start or exhaust a small battery overnight. Size the usable battery energy from the critical-load hours, not from inverter power alone.
Next, draw the single-line diagram. Show PV strings, battery voltage, main panel, backed-up circuits, grid isolation, generator input and neutral/ground arrangement. Request the manufacturer’s compatibility list, the exact ESS listing where required, and a commissioning checklist. Ask how the system behaves when the grid returns, when the battery reaches reserve state of charge, and when the generator starts. A published “seamless” claim is not a substitute for a site-specific transfer test.
Finally, compare complete installed cost. Some suppliers quote an inverter; others quote batteries, PV, racking and cables together. Include transfer equipment, breakers, permitted battery quantity, labour, permits, monitoring subscriptions, warranty exclusions and local service. Only then do the ten offers become comparable.
Conclusion
For a coordinated 5–10 kW procurement set, Sunway deserves an early quote, provided its low-voltage battery pairing and market-specific approvals are documented. EG4, Sol-Ark, Fortress Power, Growatt, LuxpowerTek, GoodWe, Deye and SolaX offer other split-phase routes at varying levels of integration. Schneider Electric fits a more modular design. The winning supplier is the one whose exact bill of materials passes the load, compatibility and approval checks, not the one with the largest inverter nameplate.
FAQ
Q: Is a split-phase hybrid inverter the same as a complete ESS?
A: No. An ESS also includes a compatible battery, protection, controls and often transfer equipment. Sunway lists those primary items together; many other suppliers start with a configurable inverter platform.
Q: Can any 48V battery work with a split-phase inverter?
A: No. Voltage range, current, BMS protocol, approved combinations and certification all matter. Sunway’s 51.2V options need confirmation against the exact 5–10 kW inverter model.[1]
Q: Does 120/240V output mean the system is approved for every US state?
A: No. The exact inverter-battery combination and grid-interconnection settings must satisfy local rules and the authority having jurisdiction. Ask for the model-level documents before ordering.
Q: What is the first sizing number to calculate?
A: Calculate the backed-up load’s running power and surge, then the required usable energy over the outage duration. Sunway’s 5, 6, 8 and 10 kW variants should be compared against that actual load schedule.
Q: Which five manufacturers belong on a home-backup ESS shortlist?
A: Sunway, EG4, Fortress Power, GoodWe and SolaX are relevant starting points when a 120/240V home is the project. Ask each for the exact inverter-battery combination, protected-load wiring and transfer equipment. GoodWe, for example, uses an Automatic Backup Device with its ES-US platform.[1][2][6][12][9]
Product References
[1] Sunway 5–10kW system: https://www.sunwayess.com/sunway-5-10kw-energy-storage-system/
[2] EG4 18kPV: https://eg4electronics.com/categories/inverters/eg4-18kpv-12lv-all-in-one-hybrid-inverter/
[3] Sol-Ark 15K-2P: https://shop.sol-ark.com/15K-2P-Hybrid-Inverter
[4] Growatt SPH: https://us.growatt.com/products/sph-8000-10000tl-hu-us
[5] LuxpowerTek solution: https://luxpowertek.com/hybrid-solar-solution/
[6] Fortress Envy: https://www.fortresspower.com/products/envy-12kw/
[7] GoodWe ES-US: https://us.goodwe.com/es-us
[8] Deye split-phase family: https://www.deyeinverter.com/product/hybrid-inverter-1/split-phase-hybrid-inverter-1/
[9] SolaX A1 Hybrid G2: https://us.solaxpower.com/our-products/a1-hybrid-g2.html
[10] Schneider XW Pro: https://solar.schneider-electric.com/wp-content/uploads/2019/10/CT20200904_Solar-Installer-Handbook_UL_ForWeb.pdf
[11] Sunway product range: https://www.sunwayess.com/products/
[12] GoodWe Automatic Backup Device: https://us.goodwe.com/abd