Vaporesso XROS

Vaporesso XROS Vape Range Guide: Which XROS Kit Suits You?

The Vaporesso XROS vape range is a family of refillable pod kits built around shared top-fill pods, with compatibility exceptions covered below, so a choice between them comes down to battery size, controls and how much you want to adjust. This guide sets out how the range fits together, compares the kits side by side, and matches each one to the kind of vaper it suits. The wider collection is on Go Smoke Free’s Vaporesso kits page.

How the Vaporesso XROS Range Fits Together

The kits in this guide take a top-fill pod with a built-in coil, and GSF sells the replacements as XROS COREX pods. On the XROS 5 and XROS 5 Mini, GSF’s operating guide has you take the pod off the battery, snap off the mouthpiece and fill through the fill port. When the coil wears out, you replace the entire pod, with no separate coil to fit.

What changes from kit to kit is the battery, the controls and the size. Some kits have a screen and a fire button. Others have nothing to press: you inhale and the device fires, which is called auto-draw. Pods hold 2ml in the UK, which follows the tank limit in the Tobacco and Related Products Regulations 2016. Vaporesso lists its XROS pods as 3ml, or 2ml for TPD markets, so the larger figure on international listings is not the size sold here.

Vaporesso XROS Vape Range Compared

The table compares the Pro 2, XROS 5, 5 Mini, Mini and Cube. The XROS 4, 3 and 3 Mini follow in their own table further down. Figures come from each kit’s Go Smoke Free listing and were cross-checked against Vaporesso’s own pages, Vaping360 and Planet of the Vapes where those sources cover the same kit. The pod resistances in the box, and the XROS 3’s output range in the older kits table, come from GSF’s listings alone, so check them against your order.

Kit Battery Screen and controls Pods in the box Airflow
XROS Pro 2 2000mAh 0.96” colour screen, up to 30W, auto-draw or fire button 0.4Ω and 0.6Ω COREX 3.0 Side slider
XROS 5 1500mAh 0.88” display, up to 30W, three power modes, auto-draw or fire button 0.6Ω and 0.8Ω Side slider
XROS 5 Mini 1500mAh No screen, LED battery indicator, auto-draw only One 0.6Ω Slider
XROS Mini 1000mAh No screen, fixed 11 to 16W, auto-draw only One pod, 0.8Ω or 1.2Ω depending on colour Not listed
XROS Cube 900mAh No screen, LED battery indicator, fixed 16W, auto-draw only 0.8Ω and 1.2Ω Switch on the base

Read the table from left to right as a ladder of effort. The Pro 2 and XROS 5 give you a display and power settings. The 5 Mini keeps the XROS 5’s 1500mAh battery but strips out the controls. The XROS Mini and Cube are the plainest devices here, with fixed output and no screen, although the Cube has an airflow switch on its base.

The Vaporesso XROS Kits in Detail

Vaporesso XROS Pro 2

The XROS Pro 2 has the largest battery in this guide at 2000mAh and a colour screen. The listing also gives a Super Pulse mode, Smart and Eco modes, and a lock switch. It ships with a 0.4Ω pod already fitted and a 0.6Ω pod in the box.

GSF’s listing recommends a wattage for each pod resistance, from 25W for the 0.4Ω pod down to 10W for the 1.2Ω pod, which suits someone who wants to match power to pod. It also has more settings than the other kits in this guide, a plus if you like to adjust and extra work if you do not.

Vaporesso XROS 5

The XROS 5 pairs a 1500mAh battery with a 0.88” display and three power modes: Eco, Normal and Power. You can fire it by inhaling or by pressing the button, and the listing says five presses of the button switch it on or off.

It suits someone who wants to see battery level on a screen without moving to the largest device. The listing and the XROS 5 vs XROS 5 Mini guide cover filling, charging and troubleshooting in more detail.

Vaporesso XROS 5 Mini

The XROS 5 Mini keeps the 1500mAh battery of the XROS 5 in a shorter body with no screen and no buttons. It fires when you inhale, and a slider moves the airflow between a tighter mouth-to-lung (MTL) draw, where vapour goes into the mouth before the lungs, and a looser restricted direct-to-lung (RDTL) draw.

One 0.6Ω pod comes in the box, and the listing says the 0.4Ω pod is sold separately. With one pod in the box, a spare is worth having. The same operating guide applies to this kit.

Vaporesso XROS Mini

The XROS Mini is an auto-draw kit with a 1000mAh battery and a fixed 11 to 16W output. The listing says the device detects the pod and sets the wattage itself. Its listed size and battery match the XROS Mini that Planet of the Vapes reviewed in 2021, so it is an older design than the XROS 5 family.

Check the pod resistance for your colour before ordering, because the listing gives 0.8Ω for some colours and 1.2Ω for others.

Vaporesso XROS Cube

The XROS Cube is a compact kit at 72mm (the XROS Mini is 98.9mm), with the smallest battery here at 900mAh and a fixed 16W output. It ships with a 0.8Ω pod fitted and a 1.2Ω pod in the box, plus a lanyard. The airflow switch sits on the base.

The listing says the Cube cannot use XROS Pro pods, which it says can only be paired with Pro kits, and the pods listing does not name the Cube for the 0.4Ω pod. Check this before ordering pods for it. It suits someone who wants a small, button-free backup.

Older XROS Kits: XROS 4, XROS 3 and XROS 3 Mini

The XROS 4, XROS 3 and XROS 3 Mini are earlier than the XROS 5 family and are still listed. Each has a 1000mAh battery.

Kit Screen and controls Pods in the box Airflow
XROS 4 Battery indicator, three output modes, auto-draw or fire button Two pods Slider
XROS 3 Battery indicator, 11 to 16W, auto-draw or fire button 0.6Ω and 1.0Ω Adjustable
XROS 3 Mini Battery indicator, auto-draw only One 0.6Ω Not listed

The XROS 4 and XROS 3 have a fire button and adjustable airflow. The XROS 3 Mini has no fire button, and its listing does not mention airflow adjustment. Vaping360’s XROS 3 review describes the XROS 3 Mini as having preset airflow and no button, and says it takes the same pods as the XROS 3. The XROS 4 listing also says it cannot use XROS Pro pods, although the pods listing names the XROS 4 for the 0.4Ω pod. The two pages disagree, so confirm before ordering a 0.4Ω pod for it.

XROS Pods: What Fits Which Kit

Go Smoke Free’s XROS COREX replacement pods come in several resistances, and the listing sorts them by draw style. Lower resistances suit a looser restricted direct-to-lung draw, and higher ones suit mouth-to-lung. The wattages below are the ones the XROS Pro 2 listing recommends for each pod, so they apply to that kit, not to the fixed-output kits.

Pod Draw style on the pods listing XROS Pro 2 recommended wattage
0.4Ω RDTL 25W
0.6Ω RDTL 21W
0.8Ω MTL 16W
1.0Ω MTL 12W
1.2Ω MTL 10W

The XROS Mini, XROS 3 and XROS 3 Mini listings describe their pods as suited to 50/50 and nic salt e-liquids, while the Pro 2 listing gives different pairings in different places, so check the listing for the pod you are buying. Fixed-output kits such as the XROS Mini and Cube set power themselves, so the wattages above do not apply to them.

The pods listing offers both COREX 2.0 and COREX 3.0 pods without explaining the difference. GSF’s XROS 5 listing says the kit takes both, and Vaporesso says its XROS pods have been upgraded to COREX 3.0 across the series. Neither explains a difference in fit, so check the listing for your kit if you are unsure.

The one pod to check carefully is the 0.4Ω. The pods listing’s variant names say it is for the XROS Pro, XROS 4, XROS 4 Mini, XROS 5 and XROS 5 Mini only, although its description names only the Pro, XROS 4 and XROS 4 Mini. The XROS Mini, XROS 3, XROS 3 Mini and Cube are not named, so confirm your kit before ordering. The XROS Pro 2 is not named either, but its own listing says it takes the full XROS range from 0.4Ω to 1.2Ω, and it ships with a 0.4Ω pod. The XROS 4 is the awkward case, because its own page says it cannot use XROS Pro pods. For any other resistance, check the pods listing for your kit.

Which Vaporesso XROS Kit Should You Choose?

  • A simple first pod kit: the XROS 5 Mini. It has no screen and nothing to press, and the airflow slider covers both draw styles. The catch is one pod in the box.
  • A screen and a mid-sized battery: the XROS 5. It adds a display and power modes to the same 1500mAh battery. Against that, the body is longer than the Mini’s.
  • The most adjustment: the XROS Pro 2. It has the largest battery, a colour screen and wattage guidance per pod. The cost is more settings to learn.
  • A compact backup: the XROS Cube. At 72mm it is shorter than the XROS Mini, with fixed output and no screen or buttons. You give up battery size and a screen.
  • An older, plain kit: the XROS Mini or the XROS 3 Mini. Both fire on inhale with no buttons and are older designs. Neither has a screen.

If you are new to pod kits, start with the first option. If you already know your preferred draw and pod, the Pro 2 and XROS 5 give more room to adjust.