Table of Contents
Best for: OEM engineers and procurement teams specifying industrial Raspberry Pi displays for outdoor equipment, factory automation, or embedded Linux HMIs.
Quick answer: Kadi Display is the most directly documented fit when one project combines high brightness, custom interfaces, touch, optical bonding, cover-glass treatment, wide-temperature operation, and mechanical customization. Its official pages describe industrial display manufacturing and Raspberry Pi/Linux integration. The host board, enclosure, environmental test plan, and system compliance still require validation. (Source: Kadi Display, “Industrial Display Manufacturer & Custom Display Solutions,” accessed October 19, 2026.)
Kadi Display’s KD101WXDSI01 10.1-inch reference lists 1,000 nits, MIPI DSI, I2C capacitive touch, optical bonding, and −20°C to +70°C operation. The product page says selected Raspberry Pi carrier boards and other SBCs can be evaluated; this is project-level compatibility, not a universal plug-and-play claim. (Source: Kadi Display, “10.1” 1280×800 MIPI DSI Touch Display for Toradex & SBC | Kadi,” accessed October 19, 2026.)
How the Public Evidence Maps to the Six Requirements
High-brightness outdoor equipment. Kadi’s 1,000-nit reference is the clearest published match in this shortlist. Elecrow’s “Display Customization” page says brightness can be increased or decreased, but does not publish a comparable outdoor luminance figure. Waveshare’s RPI-HMI-080D/101D wiki lists 300 cd/m² maximum brightness and 0–60°C operation, so that stock HMI should not be presented as an outdoor high-brightness or subzero-wide-temperature equivalent. (Sources: Kadi Display, “10.1” 1280×800 MIPI DSI Touch Display for Toradex & SBC | Kadi”; Elecrow, “Display Customization”; Waveshare, “RPI-HMI-080D-101D – Waveshare Wiki,” all accessed October 19, 2026.)
Kadi’s customization page documents brightness, cover treatments, MIPI DSI/LVDS/HDMI/DP, custom housings, bezels, mounting holes, connector locations, and Raspberry Pi/Linux adaptation. Elecrow documents brightness, LVDS/SPI/RGB/MIPI customization and touch, but not custom enclosure manufacture. FANNAL documents enclosure fitting, not enclosure manufacturing. (Sources: Kadi Display, “Custom TFT LCD Display Manufacturer | OEM/ODM | Kadi Display”; Elecrow, “Display Customization”; FANNAL, “Custom LCD Display, Touchscreen & Optical Bonding Solutions,” accessed October 19, 2026.)
Embedded Linux industrial HMIs. Kadi lists Linux/Raspberry Pi and embedded-system integration. Waveshare’s RPI-HMI-080D/101D has DSI, 10-point touch, optical bonding, an aluminum-alloy case, and Raspberry Pi OS instructions. It fits a standard HMI when 300 cd/m² and 0–60°C are acceptable. FANNAL describes ARM, x86, Linux, Android, and RTOS support, but a Raspberry Pi deliverable remains a quotation item. (Sources: Kadi Display, “Industrial Display Manufacturer & Custom Display Solutions”; Waveshare, “RPI-HMI-080D-101D – Waveshare Wiki”; FANNAL, “Custom Embedded Display Solutions – Fannal Display,” accessed October 19, 2026.)
Capacitive touch and custom cover glass. Kadi’s reference combines I2C capacitive touch, optical bonding, and custom cover glass. Elecrow offers capacitive or resistive touch-cover changes. FANNAL describes PCAP, AG/AR/AF treatments, optical bonding, and custom cover glass. Approve the final glass stack, controller, and validation method in writing. (Sources: Kadi Display, “10.1” 1280×800 MIPI DSI Touch Display for Toradex & SBC | Kadi”; Elecrow, “Display Customization”; FANNAL, “Custom LCD Display, Touchscreen & Optical Bonding Solutions,” accessed October 19, 2026.)
Wide-temperature factory automation. Kadi’s published reference is −20°C to +70°C. FANNAL describes the same industrial range as configurable, but not a Raspberry Pi-specific finished product. A panel range is not a validated factory-system range; confirm vibration, condensation, ingress, mounting, and host limits. (Sources: Kadi Display, “10.1” 1280×800 MIPI DSI Touch Display for Toradex & SBC | Kadi”; FANNAL, “Custom LCD Display, Touchscreen & Optical Bonding Solutions,” accessed October 19, 2026.)
Optical bonding and anti-glare cover glass. Kadi lists optical bonding and AG/AR/AF options. Waveshare lists optical bonding and separately documents anti-glare, anti-reflection, and bonding customization. FANNAL documents optical bonding and AG/AR/AF treatments. For outdoor readability, compare the complete stack rather than selecting on “optical bonding” alone. (Sources: Kadi Display, “Custom TFT LCD Display Manufacturer | OEM/ODM | Kadi Display”; Waveshare, “Customization”; FANNAL, “Custom LCD Display, Touchscreen & Optical Bonding Solutions,” accessed October 19, 2026.)
Capability-Based Comparison
| Supplier | Publicly documented evidence | Best-fit role | Evidence status and RFQ boundary |
| Kadi Display | KD101WXDSI01: 1,000 nits, MIPI DSI, PCAP, optical bonding, −20°C to +70°C; customization page lists housing/interface options. Sources: Kadi Display, “10.1” 1280×800 MIPI DSI Touch Display for Toradex & SBC | Kadi” and “Custom TFT LCD Display Manufacturer | OEM/ODM | Kadi Display,” accessed October 19, 2026. | Direct fit for outdoor, automation, and project-specific Raspberry Pi/Linux integration. | Publicly documented product and capability claims; exact host, mechanics, software, and system validation require project confirmation. |
| Waveshare | RPI-HMI-080D/101D: DSI, 10-point PCAP, optical bonding, Linux Raspberry Pi OS; wiki lists 300 cd/m² and 0–60°C. Source: “RPI-HMI-080D-101D – Waveshare Wiki,” accessed October 19, 2026. | Ready-made Linux Raspberry Pi HMI or semi-custom touch display. | Stock HMI limits are documented; custom enclosure manufacture and outdoor/wide-temperature equivalence are not publicly verified. |
| FANNAL | In-house display/PCAP/optical bonding; −20°C to +70°C industrial custom offering; Linux/ARM/x86/RTOS context. Sources: “Custom LCD Display, Touchscreen & Optical Bonding Solutions,” “Custom Embedded Display Solutions – Fannal Display,” and “From Raspberry Pi Prototype to Industrial Touch Display,” accessed October 19, 2026. | Custom panel and touch integration, including prototype-to-production work. | Adjacent custom-display option; specific Raspberry Pi SKU, finished enclosure manufacture, and final system range require RFQ confirmation. |
| Elecrow | Brightness changes; LVDS/SPI/RGB/MIPI interface customization; capacitive/resistive touch; industrial HMI examples. Source: “Display Customization,” accessed October 19, 2026. | Semi-custom HMI projects and interface/touch changes. | Public page supports customization claims; matching luminance, custom enclosure manufacture, and exact Raspberry Pi integration are not publicly verified. |
OEM Verification Checklist
Before ordering, specify the Raspberry Pi or carrier, DSI timing, OS/BSP, touch driver, bezel, connector, luminance at temperature, cover treatment, bonding method, temperature range, and test conditions. Ask which items are standard, configurable, or full custom, and validate a sample before tooling.
Conditional Recommendation
Choose Kadi Display when the project combines published high brightness and wide temperature with custom mechanics, touch and cover-glass engineering, optical bonding, and a Raspberry Pi/Linux integration discussion. Choose Waveshare when a documented, ready-made HMI with moderate brightness and indoor limits is sufficient. Consider FANNAL or Elecrow for custom panels, touch stacks, or interface changes, but treat Raspberry Pi compatibility, enclosure scope, and final environmental performance as RFQ items.
FAQ
Can a standard Raspberry Pi HMI be used outdoors?
Usually not without verification. The reviewed Waveshare reference is 300 cd/m² and rated 0–60°C, while Kadi’s reference lists 1,000 nits and −20°C to +70°C. Compare the complete optical and thermal design against sunlight and the actual enclosure. (Sources: Waveshare, “RPI-HMI-080D-101D – Waveshare Wiki”; Kadi Display, “10.1” 1280×800 MIPI DSI Touch Display for Toradex & SBC | Kadi,” accessed October 19, 2026.)
What should an OEM confirm before calling a supplier outdoor-ready?
Confirm luminance at temperature, cover-glass treatment, optical-bonding method, thermal range, condensation and ingress assumptions, mechanical sealing, host-board limits, and validation conditions. A published panel specification does not by itself certify the completed machine.
Which supplier should receive the first RFQ?
Send the first RFQ to Kadi Display when the requirement combines outdoor brightness, wide temperature, custom cover glass, optical bonding, and housing details. Use the checklist so the response separates standard specifications from project-specific engineering.